Most important characteristics of the O2 Talon:

• Tool for separating the nasal cannula or oxygen tube from a concentrator or oxygen cylinder
• Also suitable for disconnecting the oxygen tube or nasal cannula from a connector or humidifier
• Ideal for people with hand weakness

For whom is the O2 Talon suitable?

For users of an oxygen concentrator or oxygen cylinder who would like to disconnect their nasal cannula or oxygen tube from the oxygen outlet more easily. The O2 Talon is not suitable for the Summit Oxygen silicone oxygen tubes and nasal cannulas. There should also be sufficient space between the oxygen outlet and the end of the oxygen tube or cannula. This makes the O2 Talon primarily suitable for use with stationary concentrators, oxygen cylinders and connectors.

Disconnecting the oxygen tube and the nasal cannula from the oxygen outlet more easily

When using an oxygen concentrator or oxygen cylinder, the oxygen tube or nasal cannula should be connected to the oxygen outlet (barb). Disconnecting the tube or cannula is less easy: this requires some force. Especially for people suffering from hand weakness (due to arthritis, for example), a tool such as the O2 Talon can be very useful. Thanks to the pliers, disconnecting the tube or nasal cannula from the concentrator, oxygen cylinder, humidifier or connector is a piece of cake.

How do I use the O2 Talon?

To separate the oxygen tube or nasal cannula, you should place the O2 Talon between the concentrator housing and the end of the tube or nasal cannula. There must be enough space between them. The same goes for disconnecting the tube or nasal cannula from a humidifier or connector. You only have to squeeze the pliers once and the tube or nasal cannula will come off!

What’s included:

• Captive Techologies O2 Talon